Product Specication
Model No:
SurveyorVFT
Product Code:
See Table 1
SEC: 3
SPEC:
V134
REV: 611
Vicon Product Facts
Product specications subject to change without notice.
1
Vicon part number 8009-7134-05-05
TCP/IP, Fiber and Twisted-Pair
High-Performance Camera Dome
Coaxial video transmission standard; TCP/IP, ber ■
and UTP transmission card options
ViconNet Version 5 (TCP/IP) converts to digital video ■
for viewing and control on Kollector
®
Digital Video
Recorders and ViconNet workstations
Fiber-optic option transmits video and control data ■
to ber optic receivers over long distances
UTP option transmits video up to 3000 ft over un- ■
shielded twisted pair
Lowest current draw in its class ■
DIP-switch selectable competitive camera dome pro- ■
tocols eliminate the need for external translators
On-board memory retained in housing; designed for ■
easy installation and servicing
360° continuous rotation pan-and-tilt drive with a ■
variety of color domes available
Color 22X, 22X with ExView ■
TM
, day/night 23X and 35X
camera options, maximum 420X optical/digital zoom
EIS (image stabilizer) on 35X model ■
High-resolution in 23X and 35X versions (540 TVL) ■
Indoor or outdoor, ceiling or pendant congurations ■
Digital Slow Shutter feature for enhanced low-light ■
applications
Wide Dynamic Range (23X and 35X) provides best ■
contrast for high quality images
Outdoor version provides environmental protection, ■
pressurized (PRS) and maximum security (M) ver-
sions available
Convenient integration into any existing CCTV ma- ■
trix system
GUI provides conguration of all features ■
23X/35X version provides Digital Noise Reduction ■
(DNR) and enhanced sensitivity
Enhanced autofocus ■
SurveyorVFT™ Camera Dome System is a compact, lightweight
and intelligent security device comprised of a camera, pan/tilt drive,
receiver and CPU-based electronics all in an attractive and covert
enclosure. SurveyorVFT can be programmed and operated using any
Pilot or NOVA™ control systems and enhanced Vicoax®II protocol.
It is available in a variety of indoor and outdoor versions and can be
congured with a variety of camera and lower dome types. Refer to
Table 1.
The basic SurveyorVFT provides video transmission over coaxial
cable. Options are available that provide TCP/IP (ViconNet®), ber-
optic and twisted-pair (UTP) video transmission. Each of these options
includes an interface board that allows the specic type of video
transmission. An appropriate receiver is required.
The ViconNet
®
provides support for network connection to Kollec-
tor Digital Video Recorders and ViconNet Workstations via ViconNet
software. A pre-installed network interface board allows direct plug-in
to a system network switch. Video from the camera is available to all
network recorders and workstations for live view and recording.
The Vicon SurveyorVFT camera dome can be used in conjunction with
competitive PTZ drivers through DIP-switch selection.
The SurveyorVFT is designed for easy snap-in installation. The drive
simply snaps into the housing. When removed, the housing retains all
programmed functions in its on-board memory. The customer interface
board snaps down for easy access and the PCB provides removable
terminal blocks for simple wiring connections. The SurveyorVFT has
one of the lowest current draws compared to other domes in its class.
There are four camera types available, each with NTSC and PAL
versions. The basic model is a 22X high-resolution camera/lens (CA
in the model number). Another 22X model is available with ExView™
CCD technology (22XEX). The third version is a 23X day/night cam-
era/lens and the fourth is a 35X day/night camera/lens. The day/night
models feature wide dynamic range (WDR) and noise reduction (DNR/
FNR). See Technical Information and Table 3 for camera features.
The outdoor units are provided with a blower and thermostatically-
controlled heater. Several mounting accessories are available to t
almost any installation need. Refer to Table 1 for specic SurveyorVFT
models and mounting options.
There are 79 programmable preset positions, each having a variable
preset solve accuracy of 0.1º. Programmable azimuth and compass
is displayed on screen. There are 8 compass headings (N, NE, E, SE,
S, SW, W, NW) (22XEX/23X/35X only) and pan and tilt degrees dis-
played with a 1º resolution. 16 individual programmable privacy masks
are available. Motion detection capability is available on day/night
models. For each preset, there are 6 programmable zones for motion
detection, each having 3 sensitivity levels.
Alarm inputs can be individually programmed. Programmable titling is
provided for the camera and every preset position, alarm, relay and
sector and titles can be enabled or disabled individually or globally.
Eight tours (4 on 22X) are available with 32 steps per tour. Pan and tilt
functions are externally controlled, continuously variable and program-
mable to be enabled or disabled. There is a programmable autopan
function.
Comments to this Manuals