Vicon SurveyorVFT SVFT-M Specifications download pdf (Page 3)

Important

Safeguards

GRAPHIC SYMBOL EXPLANATION

The lightening bolt symbol alerts the user to the presence of

dangerous voltage that may present the risk of electric shock.

The exclamation point symbol alerts the user to the presence of

important operating and maintenance instructions.

1. Read Instructions - Read all safety and operating

instructions before the product is operated.

2. Retain Instructions - Retain all safety and operating

instructions for future reference.

3. Heed Warnings - Pay attention to all product warnings.

4. Follow Instructions - Follow all operating instructions.

5. Cleaning -(Do not use caustic, abrasive or aerosol

cleaners)

a) For units that CAN BE DISCONNECTED from the power

source, use a damp cloth for cleaning.

b) For

units that CANNOT BE DISCONNECTED from the

power source, use a damp cloth for cleaning and do not

allow moisture or liquids to enter vents.

6. Attachments - Use only UL Listed, Vicon recommended

attachments to prevent unit damage and personal injury.

7. Water and Moisture - Use only products designed for

outdoor environments where they will be exposed to water or

moisture.

8. Accessories - Do not place the unit on an unstable surface

to avoid falling. Use only UL Listed Vicon recommended mounting

accessories.

9. Ventilation - Do not block ventilating slots and openings as

they ensure reliable operation. Do not place the unit near a

heat source or into an enclosure unless recommended by

Vicon.

10. Power Sources - The product should only be operated

from the recommended power source. Use only UL Class 2

indoor/dry or Class 3 outdoor/wet power supply.

11. Grounding - Only products equipped with a 3-prong

grounded plug should be inserted into a grounded power outlet.

Contact an electrician to replace an obsolete outlet. Do not

force a plug into a non-grounded outlet.

12. Power Cord Protection - Power supply cords should not

be routed in trafficked areas or in tight spaces where they will

be pinched or used to bear weight. Allow some slack in the

cord where it enters the unit.

13. Outdoor Cable Grounding - Use only grounded outdoor

cables to protect against voltage surges and static charges.

Section 810 of the National Electrical Code, ANSI/NFPA 70-

1984, provides information on proper grounding of the lead-in

wire to an antenna discharge unit, size of grounding conductors

and the requirements of grounding electrodes.

14. Lightning - Disconnect the product from its power source

and cable system when possible to prevent damage due to

lightning and power-line surges.

15. Power Lines - Do not locate outside cables over power or

utility lines where they can fall and make direct contact. Contact

with power lines can be fatal.

16. Overloading - Do not overload wall outlets and extension

cords to prevent risk of fire and electric shock.

17. Object and Liquid Entry - Never probe through, or spill

liquid into, enclosure openings to prevent risk of fire or electric

shock.

18. Servicing - Refer all servicing to qualified service

personnel.

19. Damage Requiring Service - Obtain service when:

a) The power-supply cord or plug is damaged.

b) Objects have fallen or liquid has been spilled into the

product.

c) The product is not designed for outdoor use and has been

exposed to water or moisture.

d) The product does not operate per the operating

instructions. Perform Vicon recommended adjustments,

modifications and troubleshooting only to avoid unit

damage and personal injury.

e) The product has been dropped.

f) The product shows a significant change in performance.

20. Replacement Parts - Use only Vicon specified

replacement parts or an approved equivalent to prevent unit

damage and injury.

21. Safety Check - Request safety checks to be performed

following repair or maintenance to verify proper operation.

22. ESD Precaution - Take all normal electrostatic discharge

precautions to avoid component damage during installation and

operation.

23. For 230 VAC Devices Only - When the disconnect device

is not incorporated in the equipment or when the plug on the

power supply is intended to serve as the disconnect device,

follow the guidelines below:

a) For permanently connected 230 VAC units, a readily

accessible disconnect device must be incorporated into

the site wiring.

b) For 230 VAC units with a plug, the outlet must be installed

near the unit and be easily accessible.

1 2 3 4 5 6 7 8 ... 22 23

Comments to this Manuals

No comments

Vicon SurveyorVFT SVFT-M Specifications Page 3

Comments to this Manuals

Related products and manuals for Security cameras Vicon SurveyorVFT SVFT-M