5
Tour Capabilities: 22X: 4 tours available.
22XEX/23X/35X: 8 tours
available. 32 programmable
events per tour. Events
may be preset positions
with speed control, alarm
acknowledge, dwell time
control, relay control, call
autotours, tour repeat or an-
othertour, save/recall camera
status.
Autotour Capabilities: 22XEX/23X/35X: 2 autotours
available with 256 pan, tilt
and zoom functions per
autotour.
Programming is done in real
time with joystick and push
buttons.
Autotours not available on
22X
model.
Alarm Capabilities: 4 alarm inputs, individually
programmable.
Functional state enable/dis-
able.
Report state (report on/off).
Active state (high/low).
Mode (manual, momentary
or automatic) with program-
mable dwell time control.
Set and reset action (pre-
set solve, relay on/off, tour,
autotour).
Alarm titling.
Relay Output
Capabilities: 1 relay output.
Power-on state defi nition
(on/off).
Output type defi nition (mo-
mentary or latching).
Relay function status titling.
Resistive Load: 0.3A @125
VAC; 1.5A @30 VDC.
Inductive Load: 0.15A @
125 VAC; 0.75A @ 30 VDC.
Control Display: On-screen, menu-driven
system allowing full confi gu-
ration of the dome.
Privacy Masks: 22XEX/23X/35X: 16 individ-
ual, programmable, zoom-
scalable.
Technical Information
Scheduling: Real time clock allows
scheduling of up to 64
events, including presets,
relays, alarms, tours or auto-
tours (not on 22X).
Multilanguage Menu: English, Spanish, French,
Italian and German.
Day/Night (23X/35X)
Features: 6 programmable motion de-
tection zones with 3 sensitiv-
ity levels; image freeze dur-
ing preset solve; fl ip (invert)
video image.
Screen Titling
Capabilities:
Programmable for camera,
preset, sector, relay and
alarms.
Camera: 1 for each.
Preset: 79 maximum.
Sector: 16 maximum
(22XEX/23X/35X only).
Alarm: 4 maximum.
Individual type date and time
enable/disable; 20 charac-
ters maximum.
Selectable position.
Three text sizes for top 2
lines.
Fade capability.
Compass/azimuth, 8 com-
pass headings (N, NE, E,
SE, S, SW, W, NW). Not
available on 22X.
Auto Baud: Auto baud detection in RS-
422/ RS-485 mode; 4800,
9600, 19,200 bps baud rates
supported.
Absolute Position Control: Available in RS-422/RS-485
mode.
Pan/tilt: 0.125°; zoom:
0.125X.
Competitive Protocols: DIP switch selectable.
Control Protocol
Hardware:
Vicon: Vicon’s Pilot/NOVA
control systems and
V1300X-DVC desk-top key-
pad or V1300X-RVC rack-
mounted keypad; NTCIP
1103 compatible hardware.
Model No:
SurveyorVFT
Product Code:
See Table 1
SEC: 3
SPEC:
V134
REV: 109
Vicon Product Facts
Note on Competitive Protocols: All companies make changes and improvements in their products. Because this product can interface with
equipment not manufactured by Vicon, there is a possibility that the interface protocols may have changed since Vicon tested this product with
the interfacing equipment. Vicon recommends purchasing a single unit for bench testing prior to purchasing and installing this product in quantity.
The Vicon SurveyorVFT is designed to store PTZ preset locations on the internal memory. Certain manufacturers’ controllers are designed
to store PTZ preset locations in the controller. Therefore preset functionality in the Vicon dome will not work correctly with these types of
controllers.
(56 pages)
(23 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals