Vicon MP-955IR User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 5
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Network and Storage Considerations
The MP-955IR IP Camera can be connected to any ViconNet version 5 network. ViconNet NVRs, DVRs and Workstations can be used for live
viewing and recording of network-streamed video. A network can be as simple as a single camera connected to a ViconNet Workstation or
can be complex with the addition of several networks interconnected via WAN. Refer to the network diagrams on the next page for sample
configurations.
When adding an MP-955IR IP Camera to the ViconNet network, the following items must be considered:
The number of cameras on a switch with respect to switch capabilities and system bandwidth mapping.
Bandwidth limitations on ports connected to Workstations (using 100 or 1000 Mbps).
Workstation capabilities such as processing speed and disk write speed.
Storage size and location types including local Workstation recording, attached SCSI RAID and integrated SAN devices.
The MP-955IR offers a variety of configurations that impact on the video quality (resolution/fps) vs bandwidth usage. There is a choice of
Video Bit Rate Mode (Constant Bit Rate and Variable Bit Rate) and Frame Rate Mode (Constant and Variable). If the Video Bit Rate is set to
variable, the Video Quality can only be set to Low, Middle or High; if it is set to constant, the video maximum bit rate is unlimited. It is
suggested that the Constant Bit Rate be selected, since it provides more exact control over the network; the parameters shown below have
been tested and proven to provide the best quality of video.
Table 1: Constant Bit Rate Guidelines (MPEG-4 Mode)
Video Settings Expected Recording Duration
Frame Rate*
Resolution
NTSC PAL
Video
Maximum
Bit Rate (K)
1 day 7 days 30 days
8 (constant mode) 2000 21.6 G 151.2 G 648.0 G
4 (constant mode) 1200 13.0 G 90.7 G 388.8 G
2 (constant mode) 500 5.4 G 37.8 G 162.0 G
1.3 Megapixel
(1280x1024, CMOS)
1 (constant mode) 256 2.8 G 19.4 G 82.9 G
30 25 1500 16.2 G 113.4 G 486.0 G
15 12 750 8.1 G 56.8 G 243.1 G
D1
(720x480@NTSC,
720x576@PAL)
10 8 500 5.4 G 37.8 G 162.0 G
30 25 750 8.1 G 56.8 G 243.1 G
15 12 384 4.1 G 29.1 G 124.4 G
10 8 256 2.8 G 19.4 G 82.9 G
Recording Requirement
CIF
(352x240@NTSC,
352x288@PAL)
5 5 128 1.4 G 9.7 G 41.5 G
*Maximum frame rate is 8 fps at 1.3 megapixel resolution.
Table 2: Constant Bit Rate Guidelines (M-JPEG Mode
Video Settings Time Frame at Quality Level (50 is Recommended)
Resolution Frame Rate 1 day 7 days 30 days
NTSC PAL ~25 ~50 ~75 ~25 ~50 ~75 ~25 ~50 ~75
8 (constant
mode)
8 (constant
mode) 77GB 135GB 195GB 539GB 945GB 1.4TB 2.3TB 4.05TB 5.85TB
4 (constant
mode)
4 (constant
mode) 38GB 68GB 93GB 266GB 476GB 651GB 1.15TB 2.1T 2.8TB
2 (constant
mode)
2 (constant
mode) 19GB 34GB 47GB 133GB 238GB 329GB 570GB 1.1TB 1.4TB
1.3 Megapixel
(1280x1024,
CMOS)
1 (constant
mode)
1 (constant
mode)
10GB 17GB 24GB 70GB 119GB 168GB 300GB 510GB 720GB
30 25 88GB 152GB 190GB 616GB 1.1TB 1.4TB 2.65TB 4.6TB 5.7TB
15 12 44GB 76GB 95GB 308GB 532GB 651GB 1.35TB 2.3TB 2.85TB
10 8 29GB 51GB 64GB 203GB 357GB 448GB 870GB 1.55TB 1.95TB
D1
(720x480@NTSC,
720x576@PAL)
5 4 15GB 26GB 32GB 105GB 182GB 224G 450GB 780GB 960GB
Table 3: Variable Bit Rate Parameters
Video Quality Min-Max Bit Rate
High
~1Mbps ~4.6Mbps
Middle
~500kbps ~2.6Mbps
Low
~300 kbps ~1.8Mbps
Product Specification
Model No:
9607-20
SEC: 3
SPEC:
V194-10
REV: 1009
Product Code
MP-955IR
2
Page view 1
1 2 3 4 5

Comments to this Manuals

No comments