Vicon SurveyorVFT SVFT-M Specifications download pdf (Page 21)

XX134-60-01 Rev 108 SurveyorVFT Camera Dome Quick Guide Wiring and Setup • 17

• To clear the autopan limits — Store preset 98. Press AUX 2 and AUX 3 without panning to set the

autopan limits to the same position. By recording both limits on the same point they will both be

deleted. The dome will now rotate continuously when placed in autopan mode until new limits are

programmed.

Recalling presets 98 has no effect.

Preset 99 (Set Manual Pan Limits) — Storing preset 99 will bring up a series of prompts to set the left and

right manual pan limits with the AUX 2 and AUX 3 keys. After these are set, the physical range between these

limits is the valid range. The camera dome will not move outside these limits. Setting pan limits also sets AP

limits if the AP limits are outside the of the pan limits. The only exceptions are prerecorded tours and

previously stored presets. To clear the pan limits, press AUX 2 and AUX 3 without panning.

Programming Menus

The Main Programming Menu is the first one seen when entering programming mode (store preset 94).

Subsequent menus, called sub-menus are accessible from this point. When in

programming mode, a function is entered by pressing the AP (autopan) key.

To back out of that function without changes, press the AI (autoiris) key.

Instructions are available on the screen for almost all functions. For

convenience, press the L-SPD (lens speed) button to display a black

background.

The selections available on this menu can be summarized as follows:

System Settings — Allows the user to adjust the speed of the pan and tilt

axes. Solving preset positions is always done at full speed. This menu also controls the Zoom Scalable

Pan/Tilt, Compass, PTZ TImeout and Flip features.

Camera Controller — Permits user adjustment of the advanced video features available on the

SurveyorVFT.

Alarm Handling — Configures the SurveyorVFT’s four alarm inputs.

Relay Driver — Adjusts and configures the relay output for control of external devices.

Source Titling — Programs and displays the various titles available to the SurveyorVFT.

Note: All titles are disabled from the factory and will not be displayed upon initial startup.

Preset/Tour Handling — Programs preset events into the camera dome. It also allows programming a series

of events or actions into a script called a Tour and Autotour and on 23X/35X versions, Motion Detection zone

set up.

Scheduler/Time of Day — The Scheduler provides a means of programming events to occur at specific

times of the day. The Time of Day feature allows programming of the time display format. It allows selection

of daylight saving time, 12/24-hour format and actual setting of the time and date.

Language — Programs language format for titles and menus. Language choices are English, Spanish,

French, German and Italian. The word “Language” will continuously change between the five translated

words, Language, Idioma, Langue, Sprache and Lingua, to alert an operator that this prompt is related to

changing the language. When selected, the menus will immediately display the new language.

Install Defaults — Resets the SurveyorVFT to the factory default settings. All previously programmed titles

and settings are lost when this function is accessed, so keep a record of programmed settings. The main

default settings are listed in the Install Defaults section. Some default settings are camera dependent; those

are not listed.

Note: On unit power up, when DIP switch SW2 positions 2, 6, 7 and 8 are all set to ON, the unit will perform

an Install Defaults.

1 2 ... 16 17 18 19 20 21 22 23

Comments to this Manuals

No comments

Vicon SurveyorVFT SVFT-M Specifications Page 21

Comments to this Manuals

Related products and manuals for Security cameras Vicon SurveyorVFT SVFT-M