Vicon V960D Series Specifications download pdf (Page 28)

Page 28 of 61

SPECIFICATIONS (CONTINUED)

f. Run an audio file on alarm; for example, audible instructions.

g. Send an email, text message, start video or any other task that can be initiated by a batch file in

response to a Central Failure Notification (CFN) or Recording System Verification (RVS)

notification.

h. An authorized user shall be able to program and execute macros remotely without the need to be

physically located at the recorder that the macros will be programmed on.

i. The Schedule/Macro button shall allow the running of preconfigured combinations of camera and

sensor routines.

j. Macro scheduling shall include but is not limited to:

Days of the week when a macro is active.

Start and end time for when a macro is active.

If a macro is to run continuously or not.

A macro shall be able to run every:

5 min, 10 min, 1/4 hour, 1/2 hour, 3/4 hour, 1 hour, 2 hours, 3 hours, 4 hours, 6 hours, 8

hours, 12 hours.

A macro shall be able to be scheduled to run for 1-256 cycles.

9. The network and sites configuration shall allow:

a. Set up of a System Nucleus and Backup Nucleus. The Backup Nucleus shall maintain an updated

backup of all System Nucleus settings for recovery in case of failure. The system shall provide

failover and redundancy and be fully operational in the event of a System Nucleus failure. Each

device shall have an updated backup table to allow operation should the System Nucleus fail. A

Network Settings menu shall provide a comprehensive worksheet for each networked device.

When all units have been set up, the resulting connected devices shall define the site.

b. Site Authorization: Workstation shall be set up using remote recorder or workstation GUI. Site

name and authorization shall be established by User and Group. Permissions shall be assigned for

all system functions.

c. Time synchronization of all components on the network.

d. All appropriate networking features including each server IP, Subnet and Gateway.

10. Device configuration shall have the ability to be configured for system recognition and operation.

Valid devices shall be:

a. Cameras

b. Sensors

c. Relays

11. All devices shall be assigned a unique ID number and title descriptor.

12. There shall be a Recording Verification System used to identify and log any recording errors

encountered during normal system operation. The log shall be manually reviewed for possible video

segment errors earmarked with a Recording Site, Device Name, Date/Time, Verified Site, Macro

Name and Error Description stamp. There shall be a Central Failure Notification (CFN) System used

to identify all possible site errors. The CFN shall be accessible from only the Nucleus unit. The log

shall be in a time/date order and be manually reviewed for errors.

13. There shall be a Site Map feature. It shall allow the installation and configuration of a custom screen

map used to identify and access site-installed components (cameras). The map should include text

boxes and sub-maps that further define the layout. This utility shall provide full

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 60 61

Comments to this Manuals

No comments

Vicon V960D Series Specifications Page 28

Comments to this Manuals

Related products and manuals for Security cameras Vicon V960D Series