Vicon V960D Series Specifications download pdf (Page 47)

Page 47 of 61

SPECIFICATIONS (CONTINUED)

PRODUCTS

System Requirements

1. Acceptable Manufacturers - Acceptable manufacturers who have demonstrated, produced, and have

history of developing products that meet the per-qualifications as outlined in part 1.3 in the Security

Electronics General section:

Requirements

1. Task Groups – Any touchscreen can take over any other touchscreen by assigning or reassigning its

Task Group. Moreover, each touchscreen can be broken down into “functional groups” or screens

and each of these can be controlled by any station dynamically.

a. Each touchscreen station shall be configurable to control part or all of the facility including door

control, intercom, lighting, video, and all other controls.

b. The administrator shall have the ability to assign and reassign Task Groups to each touchscreen

station.

c. The software should allow for on-the-fly task group changes and shall define which screens on a

screen by screen basis each location has control over.

a. All pending intercom calls shall follow their respective screen and roll over with a Task Group

change.

b. All other alarms or other calls shall also follow their respective screen to the new touch screen.

d. Secondary rollover locations shall also be defined as to allow transfer of task upon shutdown.

Each touch screen shall have the complete site software and unique IP address. At startup, and

authorized user, can assign the area served by the touch screen through the HMI, without

changing any Windows processes or IP Addresses.

e. Task Group Assignment – Provide the ability for an authorized operator (see User Levels) to

change task assignments between touchscreen locations. This shall happen on the fly and not

require any other user intervention. If a touchscreen station logs out, the touchscreen station with

the next assigned priority, will receive the logged off stations screens including all task group

assignments.

2. Harris County Re-configuration – Vendor shall program the system to allow Harris County to change

the following settings: Note: The Programmable logic controller/Human-Mmachine Interface

(PLC/HMI) system MUST allow setting re-reconfiguration in RUNTIME mode, by an authorized

user (see User Levels), in a GUI based format. Linear formats are not acceptable.

a. This device configuration shall include:

Unlocking timers

Hold-open timers

Group functions

Notes function

Screen text

Hold open reminder timers

Shunt reminder timers

Intercom isolate auto reset timers

Intercom timer limit alarms

Monitor sequence builder

Monitor sequence dwell time

Device text

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 60 61

Comments to this Manuals

No comments

Vicon V960D Series Specifications Page 47

Comments to this Manuals

Related products and manuals for Security cameras Vicon V960D Series