Vicon V960D Series Specifications download pdf (Page 38)

Page 38 of 61

SPECIFICATIONS (CONTINUED)

PRODUCTS

System Requirements

1. Acceptable Manufacturers - Acceptable manufacturers who have demonstrated, produced, and have a

history of developing products that meet the per-qualifications as outlined in part 1.3 in the Security

Electronics General section:

2. Touchscreen Control Stations

a. Touchscreen(s) (refer to plans for quantities and locations):

The LCD shall be 24" high resolution (1920 x 1200) non-interlaced with a 74 Hz refresh rate

and a dot pitch of 0.31 mm maximum. Touchscreens shall be of the SAW technology with

1200 touch points resolution. Meantime between Failures for the controller shall be greater

than 50,000 hours and a touch life in any one location of 20 million touches. Connection to

PC shall be USB.

The touchscreen driver shall allow the touch area to activate upon release from the

touchscreen.

The touchscreen must operate simultaneously with a mouse so that the user can use either the

touchscreen or the mouse without re-connections, switches, or system re-boot.

b. Touchscreen Computer (refer to plans for quantities and locations): The computer shall be at a

minimum 100% IBM compatible, Intel Core i3 Processor, 1 GB Ram DDR3 1333Mhz, 250 GB

hard drive, 8 USB ports, 10/100BaseT Ethernet card, and running Windows 7 Professional. The

computer shall also be installed with an audio card for the Digitized Voice System (DVS). All

computer requirements are minimums.

c. The Touchscreen Networking

The touchscreen stations shall be connected through a network that complies with

requirements for IEEE 802.3ab for 100/1000BaseT Ethernet. 100/1000BaseT is required so

that other members of the network are not subject to problems associated with wiring or

Ethernet ports of other network members including access to on screen video display from the

Vicon-Net system.

The programmable logic controller (PLC) shall also be a member of the network and shall

communicate directly to all control stations at a minimum standard of 10/100BaseT. All

touchscreens shall communicate directly to the each PLC independently of one another, and

the failure of no combination of touchscreen(s) shall cause any other to not function. Server

configurations where one computer serves as the communications server to the PLC or where

a local touch screen can only communicate to the local PLC in the event of a rollover are not

acceptable.

3. Touchscreen Configuration Software

a. Touchscreen Configuration Software: The touchscreen configuration software shall be non-

proprietary. It also shall be developed using a standard Windows based industrial software

package that is regularly used in industrial applications and 100% compatible with the industrial

PLC specified. Wonderware InTouch 10.1 or latest version available or equal.

b. The configuration or development software must be compatible with the PLC programming

software. The configuration software manufacturer must have the facilities and a regular

schedule for training so those individuals who receive the training will have the ability to develop

or modify the touchscreen configuration. The touchscreen station is for operator interface only.

All control functions are to be controlled by PLC software.

Omron CX Programmer

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 60 61

Comments to this Manuals

No comments

Vicon V960D Series Specifications Page 38

Comments to this Manuals

Related products and manuals for Security cameras Vicon V960D Series